Wall Hanging tool Cabinet Part 3: The doors





I finally got the time to work with the doors to my cabinet.

My first idea was to make panel doors but I do want the surface on the inside of the doors to be as clean as possible, without joints. i also want to use the full thickness of the plywood, 18 mm, to be able to hang tools on the inside.

I decided to make a compromise, the look of panel doors on the outside and the sturdiness of using a clean plywood surface on the inside.   

 I made the frame in 15mm pine and joined them with a half in half joint.




i attached the frame to the plywood with glue and dowels (sorry no pictures of that)







now i need to buy some hinges and decide what kind of finish i will use. 

to be continued ...